Dark Bit Factory & Gravity

GENERAL => General chat => Topic started by: Hotshot on October 16, 2006

Title: Computer
Post by: Hotshot on October 16, 2006
I have fixed 2 computer which are 500MHZ with 128MB Ram and other one is 1.8GHZ with 256MB Ram( the CPU been fixed and it just need graphics cards that I needs to buy  really  ;)  )

what is highest Graphics cards that I can used for 1.8GHZ computer without Frying or choking my motherboard up?

cheers
Title: Re: Computer
Post by: taj on October 16, 2006
well...I've got 2GigHz and ati x1600 PRO in it, so I think almost anything that is AGP will do you.
Title: Re: Computer
Post by: Blitz Amateur on October 16, 2006
AS long as you've got AGP and a good PSU, you can do a pretty good graphics card.
Title: Re: Computer
Post by: Hotshot on October 16, 2006
My power supply called MODEL:LC A300 ATX

I think my power supply is about 300 WATTS.

cheers    :cheers:
Title: Re: Computer
Post by: nawitus on October 18, 2006
I have 2 PSU's, becose I'm lee7
Title: Re: Computer
Post by: Clyde on October 18, 2006
Best way of checking really, is to take a look at the system requirements on the boxes of Graphics cards. Or if in doubt go with a mate and ask at a reputable PC store. Thats the only advice I could really give.
Title: Re: Computer
Post by: Jim on October 18, 2006
Just keep plugging things in until something melts, then replace that something [1].  I'm an idiot.  I've got a mini-tower with a 380W PSU in it, 4 massive hard disks and a Radeon X1600 AGP.  There's so many dangling drives and power splitter cables in there I can barely close the case for all the cabling :)

I think it's time for Core2 and Vista upgrade :D

Jim
[1] Actually, please DON'T do this!
Title: Re: Computer
Post by: relsoft on October 19, 2006
Just keep plugging things in until something melts, then replace that something [1].  I'm an idiot.  I've got a mini-tower with a 380W PSU in it, 4 massive hard disks and a Radeon X1600 AGP.  There's so many dangling drives and power splitter cables in there I can barely close the case for all the cabling :)

I think it's time for Core2 and Vista upgrade :D

Jim
[1] Actually, please DON'T do this!


LOL.

Title: Re: Computer
Post by: Voltage on October 19, 2006
One of my PC's had no sides, and the motherboard wasn't attached to the tower at all, it was just help semi upright by all of the connecting cables. :)

My new PC is much less dusty.
Title: Re: Computer
Post by: Rattrapmax6 on October 19, 2006
One of my PC's had no sides, and the motherboard wasn't attached to the tower at all, it was just help semi upright by all of the connecting cables. :)

My new PC is much less dusty.
The PC I learned to program on ages ago was soo slow, it felt like you was using a dailup connection to look at stuff on the hard drive.... I'm surpized I ever got FreeBasic or anything to work on it....

I can tell you, this new PC scared the shit out of me when I got it running..  :o .. Like going from a Mini to a Lambo..
Title: Re: Computer
Post by: Shockwave on October 19, 2006
There are quite a few fire hazards browsing this board by the look of it :)
I can't talk though, the last PC I had before this had more bunf than an entire branch of Tandy's stuffed into it and the amazing thing was that it worked without blowing up.
Though it did get quite hot so I had to leave the sides off the case.
Title: Re: Computer
Post by: Clyde on October 19, 2006
For comps, I highly recommend Dell www.dell.co.uk
Title: Re: Computer
Post by: Jim on October 19, 2006
They make top quality PCs Clyde, there's no doubt about that, and they have a good warranty which is especially important for notebooks, but in my experience they're not always at the cutting/bleeding edge of technology and they're almost never the best value for money.  A great place to go to find out what you should be paying though :D  We use Dell workstations exclusively at our place.

Jim